Table 3-4 (Page 2 of 2). POST Error Status Codes
Error Status
83 SCSI fuse bad or PTC
84 SCSI Device command failed
85 - 86 SCSI Controller interface error
87 Short record error
88 SCSI bus parity error
89 SCSI device no reset
90 Time out error
91 SCSI no audio
92 SCSI incompatible media
93 Tape requested/actual block size mismatch
(normally)
94 Filemark or setmark read on tape device
95 Wide data transfer data miscompare error
96 Wide data transfer error other than data
miscompare
97 Command not supported by device (eg. wide
data transfer)
99 SCSI Controller interface error
Chapter 3. Error Code to FRU Index 3-17
To Next Page
Loading...
