IBM RS/6000 7024 E Series - Page 80

Table 3-4 (Page 1 of 2). POST Error Status Codes
Error Status
08 Invalid device number
11 No SCSI card
13 Command failed
28 Reservation conflict
29 Device not available
43 Not enough memory
47 Waiting for completion
49 Sense needed
51 Reset needed
55 Not ready or no media
56 Invalid (unsupported) command
57 Write protected
59 Media error
60 Hardware error
61 Unit attention
62 Blank check
63 Command abort
64 Busy
65 Media
66 Script error
67 Invalid address
68 Media changed
69 Device reset
70 Format in progress
71 Format corrupt
72 Start required
73 Device ID conflict
74 Manual intervention
75 Media not found
76 In progress
77 Media eject failed
78 Write protect failed
79 Controller memory to memory transfer test failed
80 - 81 SCSI Controller interface error
82 SCSI bus access error
3-16 Service Guide