Table 3-3 (Page 13 of 13). POST Error Codes
Error Code F Code / Description Action / Possible Failing
FRU
M0CPU000 The CPU POST failed. 1. CPU Card
2. System Board
M0CPU001 Checkstop occurred. 1. CPU card
2. System board
M0FD0000 The system hung during diskette POST. 1. System board
2. Diskette drive.
M0GA0000 Graphics adapter POST failed. Graphics adapter
M0HD0000 The system hung during boot POST. Go to MAP 1540.
M0KBD000 The system hung during keyboard POST. 1. System board
2. Keyboard
M00KBD01 The system did not respond to a keyboard entry. Type 101 keyboard
M0KBD002 The system did not respond to a keyboard entry. Type 102 keyboard
M0KBD003 The system did not respond to a keyboard entry. Kanji-type keyboard
M0MC0001 A machine check occurred. Go to MAP 1540.
M0MEM000 No good memory could be found. 1. Memory
2. System board
Note: If only one memory
module is installed, replace
it. If there are multiple
memory modules installed,
go to MAP 1540.
M0MEM001 No good memory could be found. 1. Memory
2. System board.
M0MEM002 The system hung during memory POST. Go to MAP 1540.
M0PS0000 Power failure. Go to MAP 1520.
M0SCSI00 Unable to load diagnostics. Go to MAP 1540.
M0SCSI01 Unable to load diagnostics. Go to Map 1540.
M0SPK000 A continuous beep is heard from the system. System board
M0SPK001 The system does not beep. 1. System board
2. Speaker
Chapter 3. Error Code to FRU Index 3-15
To Next Page
Loading...
