To locate the four memory module slots in the Model 150, use the following
figure.
Memory-Module
Connectors
1
2
3
4
Note: When installing memory in the Model 150, install the first memory DIMM
in slot 4, the second in slot 3, etc.
To locate the eight memory module slots in the Model 240, use the following
figure.
2. Remove any adapters that are blocking the memory module connectors (see
“Removing Adapters” on page 4-80).
3. Touch the static-protective package containing the option to any unpainted metal
surface on the system unit, then remove the option from the package.
4-26 7043 43P Series User's Guide
To Next Page
Loading...
