Need help?Do you have a question about the IBM F50 RS/6000 7025 and is the answer not in the manual?
Step-by-step guide for connecting various cables to the system unit.
Procedure for powering on the system for the first time and initial checks.
Final steps after system setup, including recording information and installing software.
Guidelines for handling and identifying hot-swap disk drives.
How to access and navigate the graphical system management interface.
Managing boot options, selecting operating systems, and installing software.
Precautions for handling electronic components sensitive to static discharge.
Instructions for increasing system memory by installing memory modules.
Guide for adding adapters to expand system capabilities via expansion slots.
Procedures for installing various types of internal drives like disk, CD-ROM, and tape.
Procedure for executing standalone diagnostics for system testing.
Sets modem configurations and phone numbers for remote maintenance support.
Tools for viewing the hardware error log using the errpt command.
Diagnoses SCSI Bus problems in a free-lance mode for troubleshooting.
Procedure for loading diagnostics, including terminal attribute setup.
Steps for initiating system verification and selecting checkout options.
Procedure for obtaining SRNs using diagnostics for hardware issue resolution.
Loading Standalone Diagnostics and checking for display issues.
Procedure to obtain error codes when diagnostics cannot be loaded.
A checklist for setting up and testing the Service Processor.
Sample procedures to verify server setup and communication with the OS.
To Next Page
General
