Removing a Processor Card (for the Model 240)
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Remove the system unit cover (see “Removing the Cover” on page 4-4).
1. The processor cards are installed under the air duct near the front of the system
unit.
2. Remove any adapters that are blocking access to the air duct and the processor
card connectors (see “Removing Adapters” on page 4-80).
3. Remove the screw that holds the air duct to the system board.
Chapter 4. Installing and Removing Options 4-67
To Next Page
Loading...
