EasyManua.ls Logo

IBM RS/6000 7043 43P Series

IBM RS/6000 7043 43P Series
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Internal Drives
Adding different types of drives enables your system unit to read a variety of media
and provides more storage for your system unit.
Internal drives are installed in
bays
. Your system unit has 5 bays:
Bay 1 has a 3.5-inch diskette drive installed.
Bay 2 has a CD-ROM drive installed.
Bay 3 can accommodate the following devices, up to half-height (43mm, 1.7 in)
tall:
tape drives
CD-ROM drives
3.5-inch disk drives (with mounting brackets)
Bay 4 can accommodate only 3.5-inch disk drives up to 25mm (1 in) in height.
Bay 5 can accommodate only 3.5-inch disk drives.
In the Model 140 and Model 150, up to 25-mm (1-inch) high disk drives can
be used.
In the Model 240, up to 43-mm (1.7-inch) disk drives can be used.
Chapter 4. Installing and Removing Options 4-87

Other manuals for IBM RS/6000 7043 43P Series

Related product manuals