What to do next?
To install or remove a drive in bay 2, continue with the next step.
To install or remove a 5.25-inch drive in bay 3, continue with step 13 on
page 4-93.
To install or remove a 3.5-inch drive in bay 3, go to step 18 on
page 4-95.
To install or remove a drive in bay 4 or 5, go to 23 on page 4-98.
If you have no more drives to install or remove, go to 20 on page 4-96.
10. If a drive is already installed in bay 2, remove the four screws attaching the drive
to the media drive bracket, and remove the drive.
11. Set the SCSI ID of the new drive to an address that does not conflict with drives
already installed.
12. Insert the new drive into bay 2 and attach the drive to the media drive bracket
with four screws.
4-92
7043 43P Series User's Guide
To Next Page
Loading...
