Step 2. Loading the Diagnostics
1. Stop all application programs running on the operating system.
2. Stop the operating system.
3. Turn the power off.
4. If you are loading the Standalone Diagnostics and running them from an ASCII
terminal:
The attributes for the terminal must be set to match the defaults of the
diagnostics.
Return to substep 5 when you finish checking the attributes.
5. Turn the power on.
a. When the initial menu appears, press the F5 key on the directly-attached
keyboard (number 5 on the ASCII terminal keyboard) to load the Standalone
Diagnostics or F6 on the directly-attached keyboard (6 on the ASCII terminal
keyboard) to load the Online Diagnostics.
b. Enter any requested passwords.
c. Follow any instructions to select a console.
6. When the Diagnostic Operating Instructions display, go to Step 3. If you are
unable to load the diagnostics, go to “Problem Determination When Unable to
Load Diagnostics” on page 8-10.
7-2
7043 43P Series User's Guide
To Next Page
Loading...
