IBM RS/6000 7043 43P Series - Page 298

This selection is used to format a selected disk drive.
 Array Controller Microcode Download
This selection allows the microcode on the 7135 controller to be updated when
required.
 Physical Disk Microcode Download
This selection is used to update the microcode on any of the disk drives in the
array.
 Update EEPROM
This selection is used to update the contents of the EEPROM on a selected
controller.
 Replace Controller
Use this selection when it is necessary to replace a controller in the array.
Adapter Microcode Download
Usage: diag -c -d <deviceName> -T "download [-B][-D][-P]"
Flag Description
-B Download boot block microcode (default to functional microcode)
-D Microcode is on diskette (default to /etc/microcode directory)
-P Download the previous level of microcode (default to latest level)
Physical Disk Microcode Download
Usage: diag -c -d <deviceName> -T "download -l <ChId> [-D][-P]"
Flag Description
-l Physical disk channel/ID (i.e. 27)
-D Microcode is on diskette (default to /etc/microcode directory)
-P Download the previous level of microcode (default to latest level)
Physical Disk Format
Usage: diag -c -d <deviceName> -T "format -l <ChId>"
Flag Description
-l Physical disk channel/ID (i.e. 27)
9-38
7043 43P Series User's Guide