3. Use one finger to slightly slide the battery toward the front of the server. (The
spring mechanism behind the battery will push it out toward you as you slide it
forward.) Use your thumb and index finger to hold the battery as it pushes out of
the socket.
Replacement: Tilt the battery so that you can insert it into the front of the socket.
As you slide the battery toward the front of the server, push it down into the socket.
Notes:
1. Be sure to tell the customer that the time and date need to be reset.
2. Ensure that the battery polarity is correct; place the battery in the holder with the
positive side facing up.
7-40
RS/6000 Enterprise Server Model H50 Installation and Service Guide
To Next Page
Loading...
