Table 15. Switch power supply specifications (continued)
Specification Value
System power consumption 48 watts nominal, 57 watts maximum
Input voltage 85 - 264 VAC, universal
Input line frequency 47 - 63 Hz
BTU rating 277 BTU/hr
Inrush current 21.5 Amps at 240 VAC cold start
Supported SFPs and HBAs
When you receive the switch, your package contains at least 8 Brocade-branded
SFPs for the base configuration. Use only SFPs that are tested and supported. For
the most up to date list of supported SFPs and HBAs for the switch, refer to the
product interoperability matrix at the IBM SAN Support web pages at:
www.ibm.com/servers/storage/support/san
Appendix A. Product specifications 37
To Next Page
Loading...
Need help?
General