Table 2. Two System Nodes to System Control Unit Clock Card Cabling
Index Number From: (U-Loc) Cable Type Index Number To: (U-Loc)
1 U2: P1-T7 Short Clock Flex
Cable (Left)
2 U3: P1-C8-T2
3 U2: P1-T8 Short Clock Flex
Cable (Right)
4 U3: P1-C9-T1
5 U4: P1-T7 Long Clock Flex
Cable (Left)
6 U3: P1-C8-T3
7 U4: P1-T8 Long Clock Flex
Cable (Right)
8 U3: P1-C9-T4
d. If you have a three node system configuration, use the diagram and the Three System Node to
System Control Unit Table below to determine point to point cabling for the clock flex cables.
Install SCM 33
To Next Page
Loading...
