IBM System/360

2841 STORAGE CONTROL (Continued)
Sense Information Summary (Cortinued)
This byte is zero at all times except when overflow incomplete occurs (Byte l,
Bit 7 ). When overflow incomplete occurs, this byte has one of the following
configurations:
00000110 - A read command was in progress when the overflow incomplete
interrupt occurred.
00000101 - A non-formating writE! command was in progress.
00100101 - A search equal key data command was in progress, and the
compare is equal to tf,is point.
01000101 - A search high key data command was in progress, and the compare
is equal to this point.
01100101 - A search high or equal key data command was in progress, and the
compare is equal to this point.
01010101 - Any search key data was in progress and the compare is low, or a
search equal key data was in progress and the compare is nnequal
to this point (i. e. , it has already been determined that no status
modifier would be set on the entire logical record.)
01110101 - A search high or high-equal key data command was in progress,
and the compare is hig;h to this point (i.e. , it has already been
determined that a status modifier would be set on the logical
record).
IBM CONFIDENTIAL
S/360 95