IBM System x3630 M4 (E5-2400) 16
Option 00D9034 is used to upgrade standard (see Table 2) or custom (CTO or special bid) models with
twelve 3.5-inch hot-swap drive bays to fourteen 3.5-inch hot-swap drive bays. This option contains the
HDD backplane, drive cage, signal and data cables, and two 1U riser cards: PCIe Riser Card 1 (1 x8
FH/HL + 1 x8 LP Slots) and PCIe Riser Card 2 (1 x4 LP for Slotless RAID). These 1U riser cards replace
the standard 2U riser cards used in the models with twelve 3.5-inch hot-swap drive bays, limiting the
maximum number of I/O slots to three (for more information, see the I/O expansion options section).
Option 00D9051 upgrades any four or eight bay model with an internal optical drive bay (for DVD-ROM or
Multiburner). This option includes one USB cable and one power cable. The optical drive is ordered
separately. This option is mutually exclusive with 90Y6370, Tape Drive Cage assembly.
Note: Option 00D9051, x3630 M4 ODD Cage assembly comes standard with every four or eight bay
standard model listed in Table 2.
Option 90Y6370 upgrades any four or eight bay model with an internal tape drive bay (for DDS5 or DDS6
tape drives). This option includes one USB cable and one power cable. The tape drive is ordered
separately. This option is mutually exclusive with 90Y6370, ODD Cage assembly.
To Next Page
Loading...
Need help?
General