POST Error Code FRU/Action
178
1. System Board
179 Boot Integrity Services Segment Error
1. System Board
183
1. Enter the administrator password
184
Asset Control Antenna not detected
1. Make sure Asset Care and Asset ID
™
are enabled in Configuration/Setup
2. RFID Antenna
3. System Board
185
Corrupted boot sequence
1. Set configuration and reinstall the boot
sequence
186 Security Hardware Control Logic Error
1. System Board
187
1. Clear Administration password
2. System Board
189
1. More than three password attempts
were made to access the computer
190
System Security: Invalid Remote Change
Requested
1. System Board
191 System Security: IBM Embedded
Security Hardware Reset
1. System Board
193 System Security: IBM Embedded
Security Hardware Removed
1. System Board
194 System Security: Asset ID Antenna has
been Removed
1. System Board
195 System Security: Asset ID Antenna has
been Installed
1. System Board
196 System Tampered Cleared
1. System Board
1XX
Not listed above
1. System Board
201, 20X
Memory data error
1. Run Enhanced Diagnostics Memory
Test
2. Memory Module
3. System Board
225
1. Unsupported Memory
229
External cache test error
1. L2 Cache Memory
2. System Board
262
POST detected a base memory or extended
memory type error
1. Run Setup. Check System Summary
menu for memory. (See “Starting the
IBM Setup Utility program” on page
19.)
2. Run the Extended Memory Diagnostic
tests.
301 Keyboard Error
1. Keyboard
2. Keyboard Cable
3. System Board
Chapter 7. Symptom-to-FRU Index 75
To Next Page
Loading...
Need help?
General