IBM ThinkPad R30 Hardware Maintenance Manual

Error
Code
Message Meanings Comment
Run the I2O
Configuration
Utility
Oneormore
unclaimed block
storage devices
have the
Configuration
Request bit set in
the LCT. Run an
I2O Configuration
Utility (e.g. the
SAC utility).
System BIOS
shadowed
System BIOS
copied to shadow
RAM.
UMB upper limit
segment
address: nnnn
Displays the
address nnnn of
the upper limit of
Upper Memory
Blocks, indicating
released segments
of the BIOS which
can be reclaimed
by a virtual
memory manager.
Video BIOS
shadowed
Video BIOS
successfully
copied to shadow
RAM
0175 Bad CRC1, stop
POST task
EEPROM CRC1 is
not correct (block
#6).
Replace
planar.
0187 EAIA data
access error
EEPROM access
(read or write) is
failed.
0188 Invalid RFID
Serialization
Information Area
or Bad CRC2
EEPROM
checksum is not
correct (block
#0,1).EEPROM
CRC2 is not
correct (block #6).
Replace
planar. Box
serial number
needs to be
reinstalled.
0189 Invalid RFID
Configuration
Information Area
EEPROM
checksum is not
correct (block
#4,5).
Replace
planar. UUID
needs to be
reinstalled.
0190 Critical
low-battery error
Critical Low
Battery.
0193 RF antenna had
been removed
RFID antenna has
been removed,
which was once
installed.
RFID model
only.
0194 The computer is
carried through
the security gate
The computer is
carried through the
security gate
(portal gate).
RFID model
only.
44 ThinkPad R30/R31 HMM

IBM ThinkPad R30 Specifications

General

Brand	IBM
Model	ThinkPad R30
Category	Laptop
Language	English