ICE Games SNACK ATTACK

Questions and Answers

J
jillhardyAug 17, 2025
Why is my ICE Games Arcade Game Machine not taking money or giving credits correctly?
- M
  Mark WhitneyAug 17, 2025
  If your ICE Games Arcade Game Machine isn't taking money or giving credits correctly, there could be several reasons: * A bad coin switch might be the culprit, so check it with a meter and replace if necessary. * The coin discounting might be set wrong, so verify the programmable settings. * The coins per credit setting could be incorrect, so check the programmable setting. * The coin mechanism might be faulty, so adjust or replace it. * There could be loose or damaged harnessing, so check with a meter and repair. * A bad main P.C. board can cause this issue, so consider repairing or replacing the main board.
M
Mrs. Barbara Nguyen DVMAug 19, 2025
What to do if the displays do not work on my ICE Games Arcade Game Machine?
- H
  hpenaAug 19, 2025
  If your ICE Games Arcade Game Machine displays are not working, several issues could be the cause: * A bad 12V fuse may be the problem, so replace it with the proper fuse. * The display P.C. board could be faulty, so repair or replace the P.C. board. * A bad main P.C. board might be the cause, so repair or replace the P.C. board. * Loose or damaged display harnessing could also be the issue, so check with a meter and repair.
A
Amy OlsonAug 22, 2025
Why does the crane or wagon not move on my ICE Games Arcade Game Machine?
- E
  eric35Aug 22, 2025
  If the crane or wagon in your ICE Games Arcade Game Machine doesn't move and keeps trying to return to the home position, here's what could be happening: * The motor may be bad, so replace the motor. * There might be loose or damaged harnessing, so check with a meter and repair. * A switch on the button or joystick could be faulty, so replace the switch. * The harnessing to the buttons or joystick could be bad, so check with a meter and repair. * A blown fuse to the motors on the main P.C.B. may be the cause, so replace it with the proper fuse. * The drive belt could be broken, so replace the broken belt. * A limit switch might be bad, so replace the switch. * The limit switch might not be aligned with the actuator, so align the switch and actuator.
T
Teresa AcostaAug 25, 2025
What to do if the claw will not close on my ICE Games Arcade Game Machine?
- J
  Julia GrossAug 26, 2025
  If the claw on your ICE Games Arcade Game Machine will not close, consider these potential causes: * A blown fuse to the claw on the main P.C. board could be the issue, so replace it with the proper fuse. * The coil might be bad, so replace the coil. * Loose or damaged harnessing could be the problem, so check with a meter and repair. * The claw might be mechanically jammed, so find the jam and repair it.
S
smithbryanAug 28, 2025
Why does the claw stay closed on my ICE Games Arcade Game Machine?
- C
  clarkkendraAug 28, 2025
  If the claw stays closed on your ICE Games Arcade Game Machine, there are a couple of potential reasons: * A bad drive transistor on the main P.C.B. could be the problem, so replace the transistor. * The claw might be mechanically locked, so find the jam and repair it.
M
Mr. Joshua Downs Jr.Aug 30, 2025
Why do the crane or wagon wheels slip on my ICE Games Arcade Game Machine?
- R
  Ryan FosterAug 30, 2025
  If the crane or wagon wheels slip on your ICE Games Arcade Game Machine, check the following: * A missing or damaged O-ring, so replace the O-ring. * Loose drive belts, so tighten the belts. * Loose set screws in wheels, so tighten the set screws. * Loose set screws in the drive coupler, so tighten the set screws. * Rails need to be scuffed, so scuff top of rails with sandpaper.
H
Hannah ReidSep 2, 2025
What to do if the claw goes down and then up but does not close on my ICE Games Arcade Game Machine?
- D
  Donna ThomasSep 2, 2025
  If the claw on your ICE Games Arcade Game Machine goes down and then up but does not close, it could be due to: * A bad down switch, so replace the down switch. * Loose or damaged harness to the down switch, so check with a meter and replace.
M
Michelle MosleySep 5, 2025
Why does the claw take 15 seconds to move home on my ICE Games Arcade Game Machine?
- B
  Brandon JonesSep 5, 2025
  If the claw on your ICE Games Arcade Game Machine comes up and about 15 seconds pass before the crane moves to the home position, consider these potential causes: * The up switch may be bad, so replace the up switch. * There might be loose or damaged harness to the up switch, so check with a meter and replace.
B
Bryan ThorntonSep 7, 2025
How to fix auto percentaging not functioning on ICE Games Arcade Game Machine?
- S
  swansoncesarSep 7, 2025
  To address auto percentaging not functioning on your ICE Games Arcade Game Machine: * Ensure the programming is correctly set by setting options “9” and “16”. * If the issue persists, the prize sensor might be bad, so replace it. * Also, check for loose or damaged sensor harness and repair it with a meter.
S
Sarah OsborneSep 12, 2025
What to do if there is no game power on my ICE Games Arcade Game Machine?
- S
  Samuel DeleonSep 12, 2025
  To resolve the issue of no game power on your ICE Games Arcade Game Machine: * Ensure the on-off switch is turned on. * Check and replace any blown A.C. power fuses with the proper fuse. * Inspect the power cord for damage and ensure it is plugged in. * Check the transformer for proper voltages. * Verify the transformer harness is connected. * If none of the above work, replace the power module.