Need help?Do you have a question about the Ice-O-Matic CIM0320HA and is the answer not in the manual?
Focuses on ENERGY STAR partnership and energy-efficient ice machines.
Guidelines for reporting and filing claims for shipping damage.
Instructions for service technicians on how to effectively use this manual.
Details on parts and labor coverage provided by the manufacturer's warranty.
Specifies the minimum and maximum ambient temperatures for optimal unit operation.
Details potable water input specifications, pressure, and temperature ranges.
Recommends water filter systems and discusses considerations for RO water.
Outlines proper installation of bin, purge, and condenser drain lines per codes.
Minimum clearances for air circulation and serviceability for air-cooled units.
States Ice-O-Matic does not endorse stacking ice machines.
Requirements for mounting the ice machine onto a dispenser securely.
Guidance on voltage, circuit breaker, and dedicated circuit requirements.
Covers leveling, water sump check, and attaching the machine to a bin/dispenser.
Defines maximum rise, drop, and length for remote condenser line sets.
Instructions for safely securing the remote condenser unit to a building's roof.
Guidance on routing and connecting pre-charged refrigerant tubing safely.
Advice on choosing an optimal, protected location for the remote condenser.
Provides formulas and examples for calculating equivalent line set length for remote condensers.
Details electrical and plumbing connections for 22" CIM air-cooled units.
Details electrical and plumbing connections for 22" CIM water/remote cooled units.
Specifies electrical and plumbing connections for 30" CIM air-cooled units.
Specifies electrical and plumbing connections for 30" CIM water/remote cooled units.
Explains the step-by-step process of the ice machine's freeze cycle.
Details the sequence of operations during the ice machine's harvest cycle.
Describes the components and layout of the CIM series control board.
Guides on adjusting ice bridge thickness after the second batch.
Outlines essential maintenance tasks to be performed every six months for optimal operation.
Details the two-part process of descaling and sanitizing CIM series ice machines.
Lists chemicals to avoid and approved formulations for ice machine cleaning.
Provides guidelines for cleaning machine surfaces to prevent corrosion.
Step-by-step instructions for taking the ice machine out of operation during winter.
General| Ice Type | Half Cube |
|---|---|
| Condenser | Air-Cooled |
| Voltage | 115 V |
| Refrigerant | R404A |
| Production Capacity | 320 lbs per day |
| Warranty | 3 years parts and labor |
| Power Supply | 115V/60Hz/1Ph |
To Next Page