ice-watch ICE CHRONO User Manual

ENGLISH
Getting started
Press
the winder.
Remove the plastic
stopper (in the direction
of the arrow).
Instructions
The watch must be serviced regularly in order for it to work correctly. The length of time between
services will vary depending on the model, climate and the care you take of your watch. As a
general rule, we recommend the following steps so that you can keep your watch in tip-top
condition for as long as possible.
- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).
- Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or
cosmetic products to prevent distorsion, discoloration or any damaging reaction.
- Do not use any watch or chronograph buttons while under water to prevent water from
entering the mechanism.
The information contained in this document belongs to ICE Universal Ltd and may not be
reproduced without its authorisation.
A) SETTING THE DATE
1. Gently pull the winder out to the 1st
position.
2. Turn the winder anticlockwise to set the
date. If the date is set between around 9pm
and 1am, it is possible that it will not change
the next day.
3. Return the winder to its normal position.
B) SETTING THE TIME
1. Gently pull the winder out to the 2nd
position.
2. Turn the winder to set the hour and minute
hands to the correct positions.
3. The second hand starts again when
the winder is pushed back into its normal
position.
C) USING THE CHRONOGRAPH
1. Press button A to start and stop the
chronograph (stop watch).
2. Press button B to re-set the chronograph.
D) CHOOSING THE CHRONOGRAPH’S
START POSITION
1. Gently pull the winder out to the 2nd
position.
2. Press button A to set the chronograph
second hand to the desired start position.
Hold down button A if you want to move the
chronograph hand forward quickly.
3. Return the winder to its normal position.
You should also use this procedure if the
chronograph hand does not return to its start
position after you press button B, as well as
when you replace the battery.
Second hand
Chrono minute hand
Minute hand
Button A
Button B
Chrono second hand
24 Hour Hand
1st position
2nd position
Normal winder position
Hour hand
Date

ice-watch ICE CHRONO Specifications

General

Brand	Ice-Watch
Model	ICE Chrono
Movement	Quartz
Chronograph	Yes
Strap Material	Silicone
Dial Color	Various
Display Type	Analog
Case Thickness	12 mm
Strap Width	22 mm
Clasp Type	Buckle

Summary

Getting Started

Remove Plastic Stopper

Remove the plastic stopper before initial use, following the indicated direction.

Winder Operation

Instructions on how to press the watch winder for adjustment or activation.

Watch Care and Precautions

Regular Servicing and Maintenance

Guidance on regular servicing and general tips to keep the watch in optimal condition.

Temperature and Environmental Handling

Avoid extreme temperatures and environmental factors like sun, steam, and chemicals.

Water Resistance Warning

Do not operate buttons underwater to prevent water damage to the mechanism.

Watch Function Operation

Setting the Watch Date

Step-by-step guide to setting the date using the watch winder.

Setting the Watch Time

Instructions for setting the hour and minute hands to the correct positions.

Using the Chronograph

How to start, stop, and reset the watch's chronograph (stopwatch) functions.

Chronograph Start Position Adjustment

Procedure to set the chronograph hand to its correct start position after battery change or reset.