ice-watch ICE DIGIT RETRO

To Next Page

ENGLISH

ATTENTION

1. Never try to open the case or remove its back cover.

2. Do not operate buttons underwater.

3. Should moisture appear inside the watch, have it checked immediately by your dealer.

Otherwise it can cause erosion of the metal parts of the watch.

4. Though the watch is designed to withstand normal use, you should avoid rough use or

dropping the watch.

5. Avoid exposing the watch to temperature extremes.

6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact

with chemical materials, which can cause deterioration of the plastic parts of the watch.

7. Avoid to wear the watch in electromagnetic, static conditions.

8. The information contained in this document belongs to ICE Universal Ltd and may not be

reproduced without its authorisation.

WATER RESISTANT: 30m

BATTERY: CR1616

Day of week

Reset Start / Stop

Mode Backlight

Hour

Seconds

Minutes

A D

B C

General functions

Date

1. USE THE BACKLIGHT: press and hold C to illuminate the display

2. DISPLAY THE DATE: press and hold D to display : Year, Month, Date

3. DISPLAY THE ALARM TIME: press and hold B

4. ON THE ALARM AND CHIME: press one time B and three times D

5. OFF THE ALARM AND CHIME: press one time B and one time D

6. DISPLAY DUAL TIME FOR OTHER TIME ZONE: press B three times

Main Page

Need help?

Do you have a question about the ice-watch ICE DIGIT RETRO and is the answer not in the manual?

Summary

Watch Safety and Attention

Prohibited Actions

Never open the case, remove the back cover, or operate buttons underwater.

Moisture and Cleaning

Check for moisture immediately; clean only with a dry, soft cloth, avoiding chemicals.

Handling Precautions

Avoid rough use, dropping, extreme temperatures, and static/electromagnetic conditions.

Document Copyright

Information belongs to ICE Universal Ltd; reproduction requires authorization.

General Watch Functions

Backlight Operation

Press and hold button C to illuminate the display.

Date Display

Press and hold button D to display Year, Month, and Date.

Alarm Time Display

Press and hold button B to display the set alarm time.

Alarm and Chime Control

Press B once and D three times to activate; press B once and D once to deactivate.

Dual Time Display

Press B three times to display the dual time for another time zone.

Time Setting Procedures

Setting Time and Date

Sequence for setting seconds, hour, minutes, year, month, and date using buttons A, B, and D.

12;24 Hour Format

Press button A in time setting mode to switch between 12-hour and 24-hour formats.

Alarm Time Setting

Setting Alarm Hour and Minutes

Access alarm mode with B, set hour with A, select minutes with B, and adjust with D.

Snooze Function

The alarm sounds daily for 60 seconds; press any button to stop it.

Stopwatch Functions

Lap Time Measurement

Start stopwatch with D, stop with D, reset with A, and return to time screen with A and B.

Split Time Measurement

Display split time with A while timing continues; clear with A. Stop with D.

Dual Time Setting

Setting Dual Time Zone

Access Dual Time Mode with B, set hour with A, select minutes with B, and adjust with D.