Ice Hoopla User Manual

THE FOLLOWING STEPS ARE ONLY REQUIRED IF YOUR GAME IS NOT ALREADY CONFIGURED FOR .50!
Step 1: Unlock and open the upper coin door. Press the “TEST” buon. This will cause the upper display on
the game to change to “TEST”.
NOTE: The small display inside the coin door will display the test and program menus. Press the “SRV”
buon to go to the next opon or menu. Press the “TEST” buon to select that opon or menu.
The next steps show the process to congure a $.50 game.
Step 2: Press “SRV” unl the menu shows “8.Game SETTINGS”.
Step 3: Press “TEST” to select this menu group.
Step 4: Press “SRV” unl it shows “SET COST OF PLAY”.
Step 5: Press “TEST” to change the value unl is shows “$.50”.
Step 6: Press “SRV” unl it shows “SET AWARD DECAL VALUES”.
Step 7: Press “TEST” unl it shows “50 ”.
Step 8: Press “SRV” once.
Step 9: Press “TEST” unl it shows “40”.
Step 10: Press “SRV” once.
Step 11: Press “TEST” unl it shows “30”.
Step 12: Press “SRV” once.
Step 13: Press “TEST” unl it shows “20”.
Step 14: Press “SRV” once.
Step 15: Press “TEST” unl it shows 15”.
Step 16: Press “SRV” once.
Step 17: Press “TEST” unl it shows “10”.
Step 18: Press “SRV” once.
Step 19: Press “TEST” unl it shows “5”.
Step 20: Press “SRV” unl it shows “Exit Game Sengs”
Step 21: Press “TEST”
Step 22: Press “SRV” to change N to Y.
Step 23: Press “TEST” to exit and accept
See “SET COIN PULSE” and “SET BONUS START” for nal changes.
THIS DISPLAY SHOWS
OPTIONS & VALUES
TEST SRV VOLUME
$.50 COST OF PLAY INSERT

Ice Hoopla Specifications

General

Brand	Ice
Model	Hoopla
Category	Arcade Game Machines
Language	English