Ice MONOPOLY ROLL-N-GO User Manual

Installing the Marquee on top of three games.
Step 2:
Unlock the back covers from the left and
right mounts. Facing the back of the game,
the cabinet to the right will have the mount
that contains all the electronics.
The cabinet to the left will have the mount
with no electronics.
Step 1:
Position the two games leaving
1/2” between them at the front.
1/2”
1/2”

Ice MONOPOLY ROLL-N-GO Specifications

General

Brand	Ice
Model	MONOPOLY ROLL-N-GO
Category	Arcade Game Machines
Language	English

Summary

Installing the Marquee on top of three games

Step 1: Game Positioning

Position two games with 1/2-inch spacing at the front for marquee installation.

Step 2: Back Cover and Mount Identification

Unlock back covers and identify mounts: right has electronics, left does not.

Step 3: Mount Cabinet Attachment

Secure cabinet mounts to the top of the cabinets using specified hardware.

Step 4: Right Upper Assembly Placement

Slide the right upper assembly onto the previously mounted cabinet fixtures.

Step 5: Secure Right Assembly

Fasten the right upper assembly to the mounts using specified bolts and washers.

Step 6: Left Upper Assembly Installation

Slide and secure the left upper assembly onto the mounts with specified hardware.

Step 7: Center Display Insertion

Insert the center display into the designated slots on the top signs.

Step 8: Display Securing

Secure the display unit to its mounting points using specified bolts and washers.

Step 9: Sign Mounting

Slide the main sign structure onto the support poles for final positioning.

Step 11: Cable Connections

Connect Game 1 DVI to marquee and network cable from marquee to center display port B.

Step 12: Wire Management

Attach wire channel covers, secure wires, and tuck them neatly inside the channel.

Software Configuration Settings

Configure game IDs and Mega Marquee settings for proper display synchronization.