Ice Whack N Win - Game Assembly and Installation; Tower and Housing Assembly

4
Step 1:
Open boom access panel to expose main board. Remove lower light housing panel to access wiring.
Remove the upper light housing panel.
Step 2:
Install 2 1/4—20 x 1 1/4 bolts half way in the light housing’s guide tabs as shown with short arrows.
Slide the light housing onto the base and stop and rest the tower on the 1/4-20 bolts. This will allow a
space for you to work in running the wiring through to the cabinet base. Don’t worry about the wiring
at this me, just be careful not to pinch the harness.
ICE part 6004 QTY 5
8-32 x 1/2 PPHMS (Black)