Ice Zodiac Plus - Overview of Printer Parts

Zodiac Plus Operator Manual
Rev AA Overview of Printer Parts 2-3
Overview of Printer Parts
The main parts of the Zodiac Plus printer is described as follows:
• CLARiTY Controller: Houses the power supply unit and touch
screen. You can access jobs, setup jobs, set the various print
parameters using the touch screen
• Printer: Houses the printhead and ribbon. The data is transferred
to the printhead from the CLARiTY controller. The printhead
prints onto the packaging film
1. CLARiTY Controller
2. Low Profile Cable Assembly
3. Sample Ribbon Roll
4. Air Regulator
5. 4 mm Air Tubing
6. Power Cable
7. CLARiTY Configuration Manager CD-ROM
8. Cassette
9. Printer
Figure 2-1:Printer Configuration Parts
9
6
1
2
5
3
4
8
7