Zodiac Plus Operator Manual
Rev AA Checking and Replacing the Ribbon 5-7
Checking and Replacing the Ribbon
Checking the Printer Ribbon Supply
The Consumables area of the home page (Figure 5-9 on page 5-7)
displays a ribbon meter, showing the amount of unused ribbon
remaining in the cassette.
The meter displays three different colors to help check the ribbon level
at a glance.
• BLUE = Adequate ribbon availability
• YELLOW = Approximately 50 m (164 ft) of ribbon remaining
• RED = Approximately 20 m (66 ft) of ribbon remaining
Replacing the Ribbon
Caution
EQUIPMENT DAMAGE. The use of incompatible ribbon can
seriously damage your printer and such damage will not be
covered by your printer warranty. Use only the ribbon that is
approved by your dealer.
Ribbon Meter
Figure 5-9: Printer Ribbon Supply
To Next Page
Loading...