Zodiac Plus Operator Manual
4-4 Selecting a New Job Rev AA
If the job includes information that you can change (i.e, job
variables such as, batch codes or expiration date), CLARiTY
prompts you to choose the information that you want to modify.
In the example in Figure 4-6, there is only one item of variable
information, the Sell By date. The current value for this date is 13
June 2007, as shown in the data window.
• If the information shown is not correct for this job, refer
“Changing Variable Information” on page 4-5 for information
on how to change it.
• If the information shown in the data window of the printer is
correct, proceed to steps 3 and 4 of this procedure.
Figure 4-5: Job Selection
Figure 4-6: Variable Information in Data Window
To Next Page
Loading...