Zodiac Plus Operator Manual
5-14 Cleaning the Printhead Rev AA
If you have been supplied with a cleaning kit that contains
cleaning wipes, use a wipe to clean the print line on the printhead
carefully. If you have been supplied with cotton swabs and a
bottle of cleaning solvent, take a new cotton bud and dip the bud
into the solvent. Wipe the print line on the printhead carefully.
Note: When the power is turned off, the printhead can be hinged away
from the printer body to get better access to clean the print line.
Note: Allow one minute for the excess isopropanol to evaporate. Failure
to allow this interval can result in damage to the printhead by thermal
shock.
4 Replace the cassette and lock it in place.
To Next Page
Loading...