Iceco JPPRO Series User Manual

2.2 MAX & ECO Mode
After the fridge turned on, press & hold “ ” for
2 seconds. Fridge will enter the setting mode.
Press the “ ” to adjust the compressor
ef ficiency and the corresponding icon
(MAX, ECO) on the display board will be
FLASHING, press the “ ” or “ ” to switch
dif ferent mode. Wait 5 seconds for the system
to finish the mode change.
There are two mode “MAX” or “ECO” (the
display board will show the running mode).
The factory settings is MAX mode.
04
ECO MAX
UV

Iceco JPPRO Series Specifications

General

Brand	Iceco
Model	JPPRO Series
Category	Freezer
Language	English