Icecrypt STC6000HD - Dish Setting

48



NOTE : Tuner Connection menu is disabled if tuner is not connected in twin satellite
or only one tuner is connected.
„Separate‟
TUNER 1
TUNER 2
„Loop-Through‟
TUNER 1
TUNER 1 TUNER 2.
NOTE : User should make the appropriate connection by choosing the right tuner connections
between the Loop-Through and Separate connections. Due to the difference of these
two connections, wrong LNB and Tuner connection may cause the loss of signal
reception. We strongly recommend the use of professional service personnel to make
this installation and connection if your knowledge is limited.
 „Loop-Through‟
(Installation-Dish Setting-Tuner Connection),





