19
STEP 11:
Locate the components shown below to assembly the ball gate assembly.
The two DB3186 ball deflectors are not installed at this time.
1K
1J 1I
2E Ball gate assembly
AA6212 1/4 X 3/4 black
washer
AA6281 & AA6212
AA6281 1/4-20 X 1-1/2 BLACK
X’s 3
STEP 12:
Secure both left (1I) and right (1J) ball deflectors to the (2E) ball gate assembly using three AA6281
black Allen bolts and AA6212 black washers on each deflector. Hardware comes from the bottom
through the floor into the deflectors.
1I 1J
2E
To Next Page
Loading...
