Need help?Do you have a question about the Icematic M302 and is the answer not in the manual?
This manual provides specifications and procedures for installation, start-up, and operation.
Disconnect power before maintenance and deactivate unit in case of faults.
Operations marked with a symbol must not be performed by the appliance user.
Includes electrical/water connections, installation, repair, disassembly, and maintenance.
Provides specifications and step-by-step procedures for installation, start-up, and operation.
Specifies ambient/water temps, water pressure, and voltage variations for operation.
Covers water inlet requirements, supply considerations, and pressure for plumbers.
Guidelines for electrical connections, cord requirements, and voltage variations.
A comprehensive checklist for verifying correct installation and setup procedures.
Explains water filling, ice formation, and sensor activation during freezing.
Details ice release, water purging, and system reset after harvesting.
Explains the refrigeration system's function during the ice-making (freeze) cycle.
Outlines the PC board sequence for freezing, harvesting, and system reset.
Lists and explains alarm states indicated by LEDs on the control panel.
Explains the PC board's role as system controller and its configuration options.
A quick reference table for diagnosing and correcting common malfunctions.
Detailed steps for cleaning the machine, including citric acid treatment.
To Next Page
General
