To Next PageTo Next Page
Need help?Do you have a question about the iCharger 456DUO and is the answer not in the manual?
General safety precautions and warnings for operating the charger.
Identifies and explains the physical components and connection ports of the charger.
Warning against connecting power input ground to output ground to prevent damage.
Details on connecting CH-1 and CH-2 to work independently.
Details on connecting CH-1 and CH-2 to charge/discharge one battery pack simultaneously.
Guides the user through configuring the charger's power source upon startup.
Instructions on how to add, delete, and edit saved battery programs or memory settings.
Guides users on selecting and starting a saved or built-in charging program.
Details on how to monitor the real-time status and information displayed during program execution.
How to adjust current and voltage parameters while a program is running.
Instructions on how to safely stop a running charging or discharging program.
Lists and explains common error codes and their meanings.
Configuration options for monitoring logs and intervals during operation.
Information on how the charger measures battery internal resistance and its limitations.
How to use USB and SD card for data transfer, firmware upgrades, and file management.
Provides a table detailing the specific voltage ranges and support for various battery types.
General setup for various LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User defined batteries.
Detailed settings for charging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User defined batteries.
Configuration for non-balance charging of LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Detailed settings for balance charging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Advanced configuration options for charging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Safety parameters for charging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Settings for storing LiPo, Lilo, LiFe, and LTO batteries for extended periods.
Detailed settings for discharging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User defined batteries.
Configuration for regenerative discharge mode where energy is returned to the input power source.
Configuration for regenerative discharge mode transferring energy to another channel.
Advanced settings for discharging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Safety parameters for discharging LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Configuration for battery cycle charging/discharging programs for LiPo, Lilo, LiFe, LiHV, LTO, NiZn, and User batteries.
Using the balance-only feature for LiPo, Lilo, LiFe, LiHV, LTO, and User batteries.
General setup for NiMH and NiCd batteries.
Configuration for charging NiMH and NiCd batteries, including Normal and Reflex modes.
Advanced charge settings for NiMH/NiCd batteries, including trickle charge options.
Settings for discharging NiMH and NiCd batteries.
Configuration for battery cycle charging/discharging programs for NiMH and NiCd batteries.
General setup for Lead-acid (Pb) batteries.
Configuration for charging Lead-acid (Pb) batteries, including Normal and Reflex modes.
Settings for discharging Lead-acid (Pb) batteries.
Configuration for battery cycle charging/discharging programs for Lead-acid (Pb) batteries.
How to configure the charger as an adjustable and stabilized digital power supply.
Accessing the system menu for setting various parameters, storage, and servo functions.
General charger setup options accessible via the system menu.
Configuration for the charger's temperature monitoring and fan speed control.
Customization of beep tones for various events like key presses and program completion.
Adjusting the brightness and contrast of the charger's LCD screen.
Configuration for the USB Power Delivery port, including communication settings.
Setting the maximum power limits for charging and discharging on CH-1 and CH-2.
Configuring input voltage, current, and regenerative power limits for the charger.
Options to save current settings to SD card and load configurations from it.
Selecting the display language for the charger interface (English, German, Chinese).
Procedure for calibrating charger settings for improved accuracy, with warnings against user calibration.
Managing log files, including transmission to PC, deletion, and deletion of all files.
Testing servo functionality using the charger's multi-function port, requiring external power.
Measuring pulse signals from receivers or transistors using the CH-1 J1 port.
Guide to installing and using the Junsi Console software for advanced data analysis and control.
Steps to update the charger's firmware using the Junsi Console software.
Instructions on how to enter boot mode for firmware recovery or update.
Procedure for updating firmware using an SD card.
Explanation of the reflex charge mode principle and its supported battery types.
How the charger acts as a power supply during discharge to regenerate energy.
Feature for transferring energy between channels during discharge, supporting various loads.
Connecting external resistance or bulbs for discharge in regenerative mode.
Connecting and discharging a battery to another channel as a load for charging.
Expanding discharge capacity for lithium batteries using external resistance.
Table detailing status indicators and their meanings during program execution.
Table explaining status indicators related to channel control and output regulation.
Comprehensive list of error codes, their messages, and detailed descriptions for troubleshooting.
General| Brand | iCharger |
|---|---|
| Model | 456DUO |
| Category | Battery Charger |
| Language | English |
