Need help?Do you have a question about the iCharger 3010B and is the answer not in the manual?
Crucial safety precautions and warnings for operating the iCharger safely and preventing damage.
Configuration options for Lithium batteries, including check time, balance speed, and balance modes.
Settings for NiMH, NiCd, and Pb batteries, including trickle charge and sensitivity adjustments.
Adjusts delta-peak detection sensitivity for NiCd and sets check delay for NiMH/NiCd batteries.
Details different Lithium battery modes like Balance, Charge, Fast Charge, Storage, and Cycle.
Instructions for charging Lithium batteries with active cell balancing for optimal charge distribution.
Guide for standard constant current/constant voltage charging of Lithium batteries.
Procedure for faster Lithium battery charging, prioritizing speed over full charge completion.
Steps for discharging Lithium batteries to a target per-cell voltage or pack voltage.
Instructions for charging NiCd and NiMH batteries in automatic or manual modes.
Steps for discharging NiCd and NiMH batteries to a specified final voltage.
Process for charging lead-acid batteries, emphasizing lower rates and trickle charge.
Steps for discharging lead-acid batteries and adjusting discharge current.
General| Input Voltage | 10-30V DC |
|---|---|
| Charge Power | 1000W |
| Maximum Regenerative Discharge Power Capacity | 1000W |
| Display | LCD |
| Battery Types Supported | LiPo, LiFe, LTO, NiCd, NiMH, Pb |
| Maximum External Discharge Power Capacity | 1200W |
| Charge Current Range | 0.1-30A |
| Discharge Current Range | 0.1-30A |
| Lilon/LiPo/LiFe/LTO battery cell count | 1-10S |
To Next Page
