Icom IC-207H - DANGER

IMPORTANT
READ ALL INSTRUCTIONS carefully and completely before
using the transceiver.
SAVE THIS INSTRUCTION MANUAL—This instruction man-
ual contains important operating instructions for the I|C-207H.
EXPLICIT DEFINITIONS
The explicit definitions below apply to this instruction manual.
Personal injury, fire hazard or electric shock
may occur.
Equipment damage may occur.
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Versions of the |C-207H which display the "CE" symbol
on the serial number seal, comply with the ETS! speci-
fication ETS300 684 (EMC product standard for
Commercially Available Amateur Radio Equipment).
CAUTIONS
Z\WARNING! NEVER connect the transceiver to ;
AC outlet. This may pose a fire hazard or result in an elect:
shock.
Z\WARNING! NEVER operate the transceiver wh
driving a vehicle. Safe driving requires your full attention
anything less may result in an accident.
NEVER connect the transceiver to a power source of mo
than 16 V DC. This connection will ruin the transceiver.
NEVER connect the transceiver to a power source usi
reverse polarity. This connection will ruin the transceiver.
NEVER cut the DC power cable between the DC plug ai
fuse holder. If an incorrect connection is made after cuttir
the transceiver might be damaged.
NEVER place the transceiver where normal operation
the vehicle may be hindered or where it could cause bod
injury.
NEVER eet objects impede the operation of the cooling f
on the rear panel.
DO NOT push the PTT when not actually desiring to transn