Icom IC-207H - Page 64

a
13 WIRELESS OPERATION é
SECONDARY FUNCTION (After a)
Writes the VFO contents into the memory
channel or call channel.
Clears a digit before entry.
Cancels the scan, priority watch, or
DTMF memory function.
Advances the memory channel number
when continuously pushed after program-
ming is completed.
Enters set mode and advances the set | Turns the DIMF memory function OFF.
e After
mode selection order. : ;
Transmit the appropriate
DTMF code.
Decreases the set mode selection order
after entering set mode.
NOTE:
The IC-207H has no voice synthesizer
function.
Sets the keypad for numeral input. Enters and exits demonstration mode.
sce Toggles between opening and closing | Starts and oe scanning.
(ea the squelch.
= Selects 1 of the 4 preset squelch levels. | Locks all the keys on the microphone key-
SQL
(*) pad.
Turns the subaudible tone encoder,
pocket beep or tone squelch OFF.
T-OFF
[®MONI]
Transmits a 1750 Hz tone
call signal for 0.5 sec.
[®SQL]
Transmits a 1750 Hz tone
call signal while pushing.