Icom IC-F1100D - Receiving a Call; D Receiving a PTT ID Call; D Receiving an MDC Emergency Call; D Receiving an MDC Stun or Revive Call

6
MDC 1200 SYSTEM OPERATION
6-3
Previous view
D Receiving a PTT ID call
When a PTT ID call is received:
• Beeps sound, depending on the presetting�
• The calling stationʼs ID is displayed.*
1
D Receiving an MDC Emergency call
When an MDC Emergency call is received:
• Beeps sound�
• The calling stationʼs ID and “Emer” is alternately
displayed.*
1
Hold down [PTT] to speak�
L The transceiver may automatically transmit an
acknowledgment to the calling station, depending
on the setting�
L To stop the Emergency beeps, turn OFF the
transceiver, change the channel, or push [PTT] or
a key�
D Receiving an MDC Stun or Revive call
If an MDC Stun call is received that matches your
station ID, the transceiver displays the stun text and
you can not receive*
2
or transmit�
To use the transceiver again, you need to:
• Receive*
2
an MDC Revive call that matches your
station ID�
• Enter the password�
• Setup again using the CS-F2100D programming
software�
Receiving a call
*
1
For the Simple key and Ten-key types� The message may
differ, depending on the presetting�
*
2
Depending on the presetting, reception may be enabled�