4
1
PREPARATION
Programmable key functions ■
Programmable key functions D
LONE WORKER
When the Lone Worker function is turned ON, and no opera-
tion occurs during the preprogrammed time period, the Emer-
gency function is automatically turned ON.
<For the IC-F3210D/F4210D series transceivers>
Hold down for 1 second to turn ON the Lone Worker func- ➥
tion.
Push to turn OFF the Lone Worker function. ➥
<For
the
IC-F3230D/F4230D/F5220D/F6220D series
transceivers
>
Push to turn the Lone Worker function ON or OFF.
RAN CH SELECT
<For the IC-F3210D/F4210D series>
N/A
<For
the
IC-F3230D/F4230D/F5220D/F6220D series
transceivers
>
While in the digital mode, push to enter the RAN channel
selection mode. Then push [CH Up] or [CH Down] to select
a desired RAN code. After selecting, push this key again to
save the code.
EMERGENCY
Hold down for 1 second to turn ON the Emergency func- ➥
tion.
While in the analog mode, after the Start or Repeat timer
period ends, the microphone audio may be automatically
transmitted, depending on the presetting.
While in the digital mode, after the Start or Repeat timer
period ends, a digital command Emergency call is auto-
matically transmitted once, or repeatedly, depending on
the presetting. After transmitting an Emergency call, the
microphone audio may be automatically transmitted, de-
pending on the presetting.
• If you want to cancel the emergency call, hold down the key
again, before transmitting it.
ENCRYPTION
<For
the
IC-F3210D/F4210D/F3230D/F4230D series
transceivers
>
While in the digital mode, hold down for 1 second to turn ➥
ON the Encryption function.
Push to turn OFF the Encryption function. ➥
<For the IC-F5220D/F6220D series transceivers>
While in the digital mode, push to turn the encryption function
ON or OFF.
To Next Page
Loading...
Need help?
General
