EasyManuals Logo

Icom IC-F4261DS User Manual

Icom IC-F4261DS
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
1 - 2
M RECEIVER
• Sensitivity : 0.24 µV typical at 12 dB SINAD Except [EUR], [DPM]
–4.0 dBµV emf typical at 20 dB SINAD [EUR], [DPM]
–8.0 dBµV emf typical at 5% BER Digital mode
• Squelch sensitivity (at threshold) : 0.20 µV typical Except [EUR], [DPM]
–8.0 dBµV emf typical [EUR], [DPM]
• Intermediate frequencies : 1st 46.35 MHz
2nd 450 kHz
• Intermodulation : Except [EUR], [DPM] Narrow 70 dB minimum
Wide 70 dB minimum
Digital 65 dB minimum
[EUR], [DPM] Narrow 65 dB minimum
Wide 65 dB minimum
Digital 71 dBµV emf minimum
• Spurious response : 70 dB minimum
• Audio output power : 0.8 W typical at 5% distortion with 12
Ω
load (internal speaker)
1.0 W typical at 5% distortion with 8
Ω
load (external speaker)
• Output impedance (Audio) : 8
Ω
Hum and noise
(With CCITT Filter)
(
[
EUR], [DPM])
: Narrow
40 dB minimum
Middle
43 dB minimum
Wide
45 dB minimum
Hum and noise
(Without CCITT Filter)
(Except [EUR], [DPM])
: Narrow 34 dB minimum
Wide 40 dB minimum
• Adjacent channel selectivity : Narrow 60 dB minimum
Middle 70 dB minimum
Wide 70 dB minimum
Digital
50 dB minimum
Specifications are measured in accordance with TIA/EIA-603B, EN 300 086 or EN 301 166.
All stated specifications are subject to change without notice or obligation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-F4261DS and is the answer not in the manual?

Icom IC-F4261DS Specifications

General IconGeneral
BrandIcom
ModelIC-F4261DS
CategoryTransceiver
LanguageEnglish

Related product manuals