Need help?Do you have a question about the Icom IC-F4002 and is the answer not in the manual?
General| IP Rating | IP54 |
|---|---|
| Power Supply Requirement | 7.2 V DC |
| Frequency Range | 400-470 MHz |
| Number of Channels | 16 |
| Channel Spacing | 25/12.5 kHz |
| Power Output | 5W |
| Battery Life | Up to 14 hours |
| Modulation | FM |
Introduction to the manual and usage advice.
Clarifies warning and caution symbols and terms used in the manual.
Critical safety warnings and guidelines for operating the transceiver.
Lists all items included with the transceiver package.
Instructions for connecting and attaching common accessories.
Detailed steps for attaching and detaching the belt clip.
Procedures for securely attaching and removing the battery pack to the transceiver.
How to attach and remove the protective cover for the SP MIC jack.
Identifies and explains the physical controls and indicators on the transceiver.
Explains the meaning of the transceiver's LED status lights.
Details the port for connecting external audio devices and accessories.
Covers the operation of programmable keys, PTT switch, and antenna connector.
Details how to use and assign functions to programmable keys for customized operation.
Steps to power on the transceiver and configure battery type settings.
Describes various methods for selecting the operating channel.
Outlines the steps for initiating calls using selective or non-selective signalling.
Guide to receiving calls and transmitting audio using the microphone.
Procedure for adjusting the microphone input gain level.
Configuration of the squelch circuit to filter background noise.
How to choose between high and low transmit output power levels.
Explanation of how the Priority A channel is selected upon powering on.
Overview of MDC 1200 system features, including PTT ID and emergency signalling.
Step-by-step guide on how to initiate an emergency call.
Details the Lone Worker function for enhanced safety during solo operations.
Safety warnings and handling precautions specific to Ni-MH battery packs.
Safety warnings and handling precautions specific to Li-ion battery packs.
Important warnings and best practices for charging all battery types.
Instructions for using the BC-191 charger for rapid charging of Ni-MH batteries.
Instructions for using the BC-192 charger for regular charging of Ni-MH batteries.
Instructions for using the BC-193 charger for rapid charging of Li-ion batteries.
How to use the BC-197 multi-charger for charging up to six battery packs simultaneously.
Steps for installing AA batteries into the optional BP-263 battery case.
Comparison of battery pack specifications and compatible chargers.
Information on DC power cables used for charging battery packs.
Details about the MB-124 belt clip accessory.
Lists available antenna types and their frequency ranges.
Covers antenna connector converters and speaker-microphone options.
How to connect optional headsets and adapter cables for VOX operation.
Procedure to enable or disable the VOX (voice-activated transmission) feature.
Adjusts the sensitivity level for the voice-activated transmission (VOX).
A reference list of countries and their corresponding ISO 3166-1 codes.
Instructions on the proper disposal of electronic products and batteries according to regulations.
To Next Page
