Need help?Do you have a question about the Icom IC-F4029SDR and is the answer not in the manual?
General| Frequency Range | 400-470 MHz |
|---|---|
| Power Output | 5 W |
| Waterproof Rating | IP54 |
| Channel Spacing | 12.5/25 kHz |
| Mode | FM |
| Voltage | 7.2 V |
| Channel Capacity | 128 channels |
| Battery Life | 10 hours |
| Operating Voltage | 7.2V DC |
Describes the physical layout and controls of the transceiver's front panel.
Explains the operation of PTT, Side keys, Volume control, and programmable keys.
Details the function display and various status indicators on the transceiver.
Explains how to assign functions to programmable keys.
Outlines functions for SCAN, LOCK, RINGER, CODE, and other special keys.
Step-by-step guide on how to send and receive calls.
Basic operation and setting CTCSS tones for silent standby.
How to set DTCS codes for group communication.
Procedure for scanning CTCSS tones or DTCS codes.
Steps for initiating a digital call using Common IDs.
How to receive and respond to digital calls.
Overview of how to enter and navigate the set mode.
Important safety warnings for handling and charging batteries.
Technical details on frequency, mode, power, and stability.
Technical details on receiver sensitivity and performance.
To Next Page
