Need help?Do you have a question about the Icom IC-F4011 and is the answer not in the manual?
General| Frequency Range | 400-470 MHz |
|---|---|
| Number of Channels | 16 |
| Channel Spacing | 12.5/25 kHz |
| Power Output | 5W |
| Water Resistance | IP54 |
| Mode | FM |
| Voltage | 7.2 V |
| Type | Handheld |
| Operating Voltage | 7.2 V |
Provides critical safety warnings for operating the transceiver, covering power, liquid exposure, polarity, and RF signal limits.
Outlines crucial guidelines and precautions for safely performing repairs and adjustments on the transceiver.
Provides step-by-step guidance for safely detaching the chassis unit, including screw and connector removal.
Outlines necessary equipment and system requirements before commencing transceiver adjustment procedures.
Guides users through adjusting frequency settings, including PLL lock voltage and reference frequency.
Details procedures for adjusting transmit power, modulation balance, and deviation parameters.
Covers steps for adjusting receiver sensitivity, squelch, and filter tuning for optimal performance.
To Next Page
