10
2
IDAS OPERATION
Receiving a call ■
Receiving a Call Alert (Continued) D
Hold down [PTT], then speak into the microphone. w
Release [PTT] to receive a response. e
Receiving a Status Message D
When a Status Message is received: q
• Beeps sound.
• The calling station or Talkgroup ID name (or code) and the status
message are alternately displayed.*
1
• “ ”
may appear or blink, depending on the presetting.*
1
• The LED may blink orange once or twice, depending on the pre-
setting.*
2
For the IC-F3230D/F4230D series transceivers
For the IC-F5220D/F6220D series transceivers
Push [PTT], change the channel, turn power OFF, and so w
on to stop the display indication.
*
1
Except for the IC-F3210D/IC-F4210D series transceivers.
*
2
Only for the IC-F3210D/IC-F4210D series transceivers.
To Next Page
Loading...
