Need help?Do you have a question about the Icom ic-f5023/h and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | ic-f5023/h |
| Category | Transceiver |
| Language | English |
Lists important safety warnings and precautions for operating the transceiver.
Provides instructions and examples for ordering replacement parts for the unit.
Offers essential guidelines and precautions for disassembling and repairing the transceiver.
Covers general operating parameters like frequency coverage, emissions, temperature, and power requirements.
Details transmitter performance characteristics including output power, deviation, and frequency error.
Outlines receiver performance metrics such as sensitivity, selectivity, and audio output.
Displays the top view of the front unit, identifying its components.
Displays the top view of the main-A unit, identifying its components.
Displays the bottom view of the main-A unit, identifying its components.
Explains the RF, 1st IF, and 2nd IF/Demodulator circuits within the receiver.
Details the Audio Frequency (AF) circuits and signaling/decoding processes.
Explains MIC amplifier, TX AF, modulation, and transmitter amplifier circuits.
Describes the frequency synthesizer circuits.
Illustrates the voltage distribution across the transceiver.
Lists pin assignments for CPU, Expander, and D/A converters.
Lists the necessary equipment and preparation steps before performing adjustments.
Details specific channel frequencies and settings required for calibration.
Shows the connection setup for test equipment and an example of the adjustment utility window.
Provides step-by-step guidance for adjusting the transceiver's frequencies.
Details the procedures for adjusting transmit power, modulation balance, and deviation.
Explains how to adjust receive sensitivity, S-meter, and squelch levels.
Lists mechanical parts for the chassis and included accessories for the unit.
Lists mechanical parts specific to the front and main-A units.
Illustrates the component layout on the top side of the main-A unit's circuit board.
Illustrates the component layout on the top side of the front unit's circuit board.
Illustrates the component layout on the bottom side of the main-A unit's circuit board.
Illustrates the component layout on the bottom side of the front unit's circuit board.
Provides the specific pinout configuration for the OPC-1939 optional cable.
Illustrates the voltage lines and their distribution within the front unit.
Shows the voltage lines and their distribution on the main unit (first page).
Shows the voltage lines and their distribution on the main unit (second page).
To Next Page
