Icom IC-F5220D - Page 25

23
2
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [Digital Button] again to enter the destination ID se- t
lection mode.
• The preprogrammed ID name is displayed.
• When the ID name is not programmed, the ID code is displayed.
• The primary ID can be preset to display first.
Push [CH Up] or [CH Down] to select the desired ID name y
(or ID code).
For the IC-F3230D/F4230D series transceiver
s
For the IC-F5220D/F6220D series transceiver
s
Push [PTT] to transmit the message to the selected station u
or talkgroup.
• “MSG TX” is displayed.
Release [PTT]. i
• “MSG OK” is displayed after receiving an acknowledgement
from the targeted station.
• “MSG FAIL” is displayed if no acknowledgment is received from
the targeted station.
After a specified time period has passed, the transceiver o
will return to receive.