26
2
IDAS OPERATION
Transmitting a call (Continued) ■
Direct ID input D
(10-key version only)
Depending on the presetting, you can directly input the de-
sired Individual or Talkgroup ID.
While in the Individual or Talkgroup ID selection mode, q
push the appropriate numeric key, [0] to [9], to input a de-
sired ID of up to 5 digits.
• Push [M] to delete an input digit.
For the IC-F3230D/F4230D series transceiver
For the IC-F5220D/F6220D series transceiver
After inputting, push [PTT] to transmit a call to the station w
or Talkgroup selected in step q.
Direct ID list number input D
(10-key version only)
Depending on the presetting, you may select the Individual or
Talkgroup ID by directly inputting the ID list number.
While in the standby mode, push the numeric key ([1] to q
[9] or [0]) to directly
select the appropriate
ID name (or ID
code)
, programmed in the ID list 1 through 10
.
For the IC-F3230D/F4230D series transceiver
For the IC-F5220D/F6220D series transceiver
Push [Digital Button] to enter the application selection w
mode, and then push [CH Up] or [CH Down] to select the
desired application.
Push [PTT] to transmit a call to the station or Talkgroup e
selected in step q.
To Next Page
Loading...
Need help?
General
