Icom IC-F6012 User Manual

5
1
PANEL DESCRIPTION
1
SURVEILLANCE KEY
Push to turn the surveillance function ON or OFF.
When this function is turned ON, the beeps do not sound
the LED does not light when a signal is received or a key is
pushed.
SIREN
Hold down for 1 second to sound the siren.
This function can be used for situations other than an emer-
gency฀alert,฀such฀as฀a฀security฀alarm฀for฀example.
•฀฀The฀siren฀can฀only฀be฀stopped฀by฀turning฀OFF฀the฀transceiver฀
power.
SCRAMBLER KEY
Push to turn the voice scrambler function ON or OFF.
HOOK SCAN
When the Hook Scan function is pre-programmed, push this
key to temporarily disable the function. Push this key again to
enable the function.
USER SET MODE KEY
➥ Hold down for 1 second to enter the User Set mode.
฀•฀฀During฀User฀Set฀mode,฀push฀this฀key฀to฀select฀an฀item*,฀and฀
change฀the฀value฀or฀setting฀using฀[CH฀Up]/[CH฀Down].
*Selectable items may differ depending on the pre-setting.
➥
Hold฀down฀this฀key฀for฀1฀second฀again฀to฀exit฀the฀User฀Set฀
mode.
The User Set mode is also available via the ‘Power ON’ func-
tion. In this case, all set mode items are available. Refer to
page 10 also.
OPT 1/2/3 OUT KEYS
Push to output the control signal to option connector. Ask
your dealer for details.
OPT 1/2/3 MOMENTARY KEYS
Outputs the control signal to the option connector while hold-
ing down this key. Ask your dealer for details.

Icom IC-F6012 Specifications

General

Brand	Icom
Model	IC-F6012
Category	Transceiver
Language	English