Need help?Do you have a question about the Icom IC-F6061 and is the answer not in the manual?
General| IP Rating | IP54 |
|---|---|
| Operating Temperature Range | -30°C to +60°C |
| Channel Capacity | 128 channels |
| Modulation | 16K0F3E, 11K0F3E |
| Power Supply | 13.8V DC ±15% |
Lists critical warnings and precautions for safe operation and equipment protection.
Provides essential guidelines and precautions for performing repairs and disassembly.
Step-by-step guide to safely remove the front panel from the transceiver.
Instructions for disassembling the main unit, including screw removal and desoldering.
Explains the function of RF circuits, including antenna switching and amplification.
Details how received signals are converted, filtered, and amplified at the 1st IF stage.
Describes the conversion, amplification, and FM demodulation of the 2nd IF signal.
Explains Voltage Controlled Oscillators (VCOs) for receiving and transmitting frequencies.
Describes the Phase Locked Loop (PLL) circuit for stable frequency generation.
Illustrates the distribution of voltage from the battery pack via switches and regulators.
Guides on setting PLL lock voltage for RX and TX.
Procedure for connecting and setting the reference frequency.
Steps for adjusting transmit output power for various levels.
Procedures for adjusting modulation balance and FM deviation.
Guides for adjusting receive sensitivity and S-meter levels.
Steps for adjusting the squelch level for proper audio output.
To Next Page
