Need help?Do you have a question about the Icom IC-F6022 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Mode | FM |
| Waterproof | IP54 |
| Operating Temperature | -30°C to +60°C |
| Channel Spacing | 25/12.5kHz |
| Channel Capacity | 128 channels / 8 zones |
Essential warnings for safe operation and preventing damage to the transceiver.
Key operational parameters including power, dimensions, and environmental limits.
Detailed performance metrics for the transmitter section.
Detailed performance metrics for the receiver section.
Visual identification of components on the front unit circuit board.
Visual identification of components on the top side of the main unit circuit board.
Visual identification of components on the bottom side of the main unit circuit board.
Detailed explanation of the receiver's signal path and processing.
Detailed explanation of the transmitter's signal path and modulation.
Explanation of frequency generation, synthesis, and voltage control mechanisms.
Visual representation of voltage distribution and regulation throughout the transceiver.
Detailed list of pin assignments for various ICs and connectors.
Lists necessary equipment and the software interface for calibration.
Detailed steps for calibrating the transceiver's frequency parameters.
Procedures for adjusting transmit power, modulation, and deviation.
Procedures for adjusting receiver sensitivity, S-meter, and squelch.
Comprehensive list of components for the main unit assembly.
List of components specific to the front unit assembly.
Component placement diagrams for the main unit's top and bottom sides.
Component placement diagrams for the front unit's top and bottom sides.
To Next Page
