10
VOICE RECORDER FUNCTIONS
10-2
This transceiver is equipped with a recorder not only
for the receive audio, but also for transmit audio�
This function is useful to make a communication
record�
NOTE:
• The recording will continue until you turn OFF the
function, or there is no more free space on the
transceiver recording memory�
• When the recording time exceeds 8 minutes, the
transceiver continues to record, but it records to a
new le.
(Menu > Voice Rec > Call Recorder)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select
“Voice Rec,” then
push [OK]�
GPS ►
Voice Rec ►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call
Recorder,” then
push [OK]�
Call Recorder ►
Play Call Rec ►
Voice Rec
4� Push [P2 (Up)] or [P1 (Down)] to select “ON,” then
push [OK]�
✔ OFF
✔ ON
Call Recorder
Call Recorder
ON
• The Call Record function is turned ON�
• Automatically returns to the standby screen�
• “
” is displayed�
5� Push [PTT] to start recording both RX and TX
communication audio�
• “ ” blinks while recording�
• Records when the mute is released�
Recording a communication audio
6� Do steps 1 ~ 3 to display the “Call Recorder”
screen�
7� Push [P2 (Up)] or [P1 (Down)] to select “OFF,”
then
push [OK]�
✔ OFF
✔ ON
Call Recorder
Call Recorder
OFF
• The Call Record function is turned OFF�
• Automatically returns to the standby screen�
• “
” disappears�
TIP: Push [Call Recorder] to turn the Call Record
function ON or OFF�
To Next Page
Loading...
Need help?
General
